When installing batteries, ensure that the polarity matches

If necessary, add external elements to the case to improve ease of use. These include a strap, clip, tactical button, and other devices.

· Visually assess the integrity of the flashlight, pay attention to the condition of the glass lens. There should be no cracks or dirt on it. In the north korea email list 815 contact leads future, periodically wipe the glass. There are liquids used for glasses lenses or camera lenses.

· If the flashlight comes with replaceable batteries, buy another set as a spare. This will allow you to avoid long breaks in work when the portable light source runs out of power.

 

How to store a flashlight

– it is also necessary to remove the batteries from the device body because the power elements may leak if not used for a long time. The electrolyte will cause the contacts to oxidize, and the device will be damaged;

– for storage, select a dry, ventilated place in a 5 google changes you need to keep an eye on room with a low humidity level. At the same time, be sure to place the flashlight in a protective case or box to prevent dust from getting on the device;

– transportation of the device also requires careful handling. For transportation, it is better to use packaging or containers with soft inner lining, a case made of dense and soft material will also do.

Before long-term storage When installing batteries

You should check the quality of the lubricant. To do this, you need to repeat the procedure of applying the protective composition.

1. The back cover and head of the mobile lead flashlight are dismantled, if the design allows it. Next, the sealing rings are removed, for which you can use a toothpick, a sewing needle or a piece of wire. This action must be done carefully so as not to damage the gaskets.

The seal is thoroughly cleaned

From the previous coating or dirt using a soft cloth (without impregnation). If wear or damage is detected, the ring must be replaced.

3. Use a brush and ethyl alcohol to clean the metal threads. Do not allow the caustic solution to come into contact with other parts of the flashlight.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top