LED lamps: features, advantages, calculation of lighting power
LED bulbs are designed in such a way that they can easily replace “classic” analogs in any type of base. However, unlike standard incandescent lamps namibia email list 137403 contact leads and even fluorescent lamps, LED lamps consume less power. Creating lighting with their help will help reduce electricity bills several times.
October 28, 2021
Content
Advantages and features of LED devices
Power and other characteristics Light-emitting diode
How to calculate lighting power for your home
Initially, LED lamps were used as decorative design. They were used to illuminate landscapes and buildings, and individual zones were 3 steps to good digital planning updated inside buildings. But as operational experience was accumulated, new LED lighting moved from the field of aesthetic application to the field of practical use. Such success is associated with the unique properties of these light sources and the advantages of their use.
Advantages and features of LED devices
The popularity of LED bulbs is due to:
directed light flux. Due to this, such lamps are effective in rooms with high ceilings. A regular incandescent lamp scatters light, which weakens philippines numbers with increasing distance to the floor. Therefore, in such a room, you have to use a chandelier with 3 or more horns. If you install an LED lighting device, then one or two bulbs with a downward beam of light will cope with the same task in terms of illumination;
Light-emitting diode multiple savings
Which are achieved not only by reducing the number of lighting devices, but also by low power consumption of LEDs. The multiple difference in comparison with classic incandescent lighting devices is 8 times. It turns out that one 15 W LED lamp can replace a regular “hundred” and even “hundred and twenty”. There is a developed table of the ratio of power in Watts or Lumens (lm) between energy-saving LED lamps and other alternatives, including fluorescent or halogen;
reduced heat generation and low starting currents.
